1/2" Impact Socket Set EMTOP Model EMSS12101

Features

• 1/2"DR/10 Pcs 1/2"DR. Impact Socket Set

• Size: 10, 12, 13, 14, 15, 17, 19, 21, 22, 24 mm

• Length: 38 mm

• Material: CrMo (Chromium Molybdenum)

• Heat Treatment: Processed with heat treatment for durability and strength

How to Use

1. Choosing the Correct Socket Size:

• Select the appropriate socket size that fits the nut or bolt you want to tighten or loosen. For example, if the nut is 17mm, use the 17mm socket from the set.

2. Installing the Socket onto the Impact Wrench:

• Attach the selected socket to the drive of the 1/2" Impact Wrench by securing it tightly into the drive socket.
• Ensure that the socket is securely attached before use to prevent accidents.

3. Operating the Impact Wrench:

• Adjust the settings on the impact wrench to match the required torque for the job (high or low torque).
• When tightening a nut, activate the tool by pressing the trigger or switch to start the wrench.
• When loosening a nut, set the wrench to rotate in the correct direction (clockwise for tightening, counterclockwise for loosening).

4. Checking and Releasing the Tool:

• After the nut is tightened or loosened, release the impact wrench and check if the job has been completed as needed.
• If needed, adjust the settings of the impact wrench and use again as required.

5. Post-Usage Maintenance:

• After usage, clean the socket and the impact wrench to prolong their lifespan.
• Store the socket set in a dry and clean area to prevent rusting.
• Regularly inspect the sockets for any signs of wear or damage and replace them if necessary.

Precautions:

• Always use the impact socket set with an impact wrench that matches the 1/2" drive size.
• Ensure that the socket is properly fitted to the nut or bolt before using the tool to avoid damaging the fastener or socket.
• Always wear protective gear, such as gloves and safety glasses, when operating an impact wrench to ensure safety.